Sony BETACAM SX A220P Operation Manual

Extended Menu6-12 Setup MenuChapter 6 Setup MenuSelect whether the REMOTE/LOCAL switch on thecontrol panel is enabled.DIS : Disabled.ENA: Enabled.Menu items in the 100s, relating to the control panels (continued)107 REC INHIBIT LAMPFLASHING108 AUTO EE SELECT109 FORCED EE WHENTAPE UNTHREADSelect whether or not to flash the REC INHIindicator when recording is prevented though theREC INHI switch on the control panel is set to OFF.OFF : Light the REC INHI indicator.ON: Flash the REC INHI indicator.When a cassette recorded in Betacam SX format isinserted and the monitor output switch on thecontrol panel is set to PB/EE, select the operationmodes in which input video and audio signals areautomatically handled in E-E mode.S/F/R : In STOP/EJECT/F FWD/REW modesSTOP: In STOP/EJECT modesDuring tape threading and unthreading, and whenno cassette is inserted, select whether the monitoroutput switch on the control panel controls theoutput signal PB/EE setting.ON : No control by the monitor output switch (thesignal is always an E-E signal).OFF: Control by the monitor output switch.118 KEY INHIBITSWITCH EFFECTIVEAREASelect which switches and buttons can be operatedwhen the KEY INH in the sub LCD menu is set toON. The following sub-items control different sets ofswitches and buttons independently.Sub-item118-1 REMOTESELECT118-2 CONTROLPANELSelect which switches and buttons operations onthe control panel are enabled.DIS : All switches and buttons are disabled.EDIT: All switches and buttons for editingoperations are disabled.ENA: All switches and buttons are enabled.ST&EJ: All switches and buttons except STOP andEJECT buttons are disabled.Item number Item name Settings