Menu
Sony BDV-NF7220 Operating Instructions Manual
Also see for BDV-NF7220: Reference guideInstallation guide
                                                                        |
2GBDo not install the appliance in aconfined space, such as a bookcase orbuilt-in cabinet.To reduce the risk of fire, do not coverthe ventilation opening of the appliancewith newspapers, tablecloths, curtains,etc.Do not expose the appliance to nakedflame sources (for example, lightedcandles).To reduce the risk of fire or electricshock, do not expose this appliance todripping or splashing, and do not placeobjects filled with liquids, such as vases,on the appliance.Do not expose batteries or applianceswith battery-installed to excessive heat,such as sunshine and fire.To prevent injury, this apparatus mustbe securely attached to the floor/wall inaccordance with the installationinstructions.Indoor use only.This equipment has been tested andfound to comply with the limits set outin the EMC Directive using a connectioncable shorter than 3 meters.5.15 GHz – 5.35 GHz band is restricted toindoor operations only.On power sources• The unit is not disconnected from themains as long as it is connected to theAC outlet, even if the unit itself hasbeen turned off.• As the main plug is used to disconnectthe unit from the mains, connect theunit to an easily accessible AC outlet.Should you notice an abnormality inthe unit, disconnect the main plugfrom the AC outlet immediately.CAUTIONThe use of optical instruments with thisproduct will increase eye hazard.As the laser beam used in this Blu-rayDisc/DVD Home Theatre System isharmful to eyes, do not attempt todisassemble the cabinet.Refer servicing to qualified personnelonly.Pick-up unit of this appliance isclassified as a CLASS 3R LASER product.Visible and invisible laser radiation isemitted when the laser protectivehousing is opened, so be sure to avoiddirect eye exposure.This marking is located on the bottomexterior of the main unit.This appliance is classified as a CLASS 1LASER product. This marking is locatedon the bottom exterior of the main unit.The nameplate is located on the bottomexterior.Recommended cablesProperly shielded and grounded cablesand connectors must be used forconnection to host computers and/orperipherals.WARNING |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved