BC05 Module Spec.Shenzhen Synchron Electronics Co.,Ltd. 2010.111.General Description and Spcification1.1 General DescriptionThis product is a Class 2 SMT Bluetooth Module used CSR BC5-MultiMediaExternal. It provides data and voice communications. It interfaces with a host throughUSB or UART and support data rate up to 12M/3Mbps.General Fetures:■ Class 2 Bluetooth Module■ Bluetooth Spec. V2.1+EDR Compliant■ Support Firmware Upgrade■ USB 2.0 and UART Host Interface■ Multi-Configurable I2S, PCM or SPDIF Interface■ Integrated 1.5V and 1.8V Linear Regulators■ Integrated Switched-mode Regulator■ Integrated Battery Charger■ Integrated Microphone bias& LED Driver■ 64MIPS Kalimba DSP Co-processor■ Built in 16-bit Stereo Codec- 95dB SNR for DAC■ Enhanced Audibility and Noise Cancellation■ Support for 802.11 Co-existence■ Green (RoHS Compliant)1.2 Device DetailsRadio■ Common TX/RX terminal simplifies external matching; eliminates external antenna switch■ BIST minimises production test time■ Bluetooth v2.1 + EDR specification compliantTransmitter■ 4dBm RF transmit power with level control from onchip 6-bit DAC over a dynamic range >30dB■ Class 2 and Class 3 support without the need for an external power amplifier or TX/RX switchReceiver■ Receiver sensitivity of -70dBm