Sony AXS-R7 Operating Instructions Manual

Also see for AXS-R7: Operating instructions Quick start guide Service manual

Using with a Camcorder 21Notes• Attach the unit after raising the release lever.• Check that the four tabs are securely engaged beforelowering the release lever. If not engaged, the unit maynot be attached properly or may damage the camcorderor unit.3 Screw the supplied top plate onto theunit and camcorder (hex key wrenchsize 3/16”).Removing from a Camcorder1 Remove the top plate from the unit andcamcorder.2 Press the release button and raise therelease lever, then slide the unit upwardand pull it out towards you.NoteAlways support the unit with your hand when removing.Inserting an AXS Memory Card1 Press the memory slot cover openbutton on the right side to open thecover.2 Insert an AXS memory card into thecard slot with the label facing thedirection shown in the diagram.3 Close the cover.NotePush the cover in until the memory slot cover openbutton is securely locked.Removing an AXS Memory CardOpen the memory slot cover on the unit,and extract the AXS memory card by hand.NoteData integrity is not guaranteed if the power is turned offor a memory card is removed while it is being accessed.All data recorded on the card may be destroyed. Alwayscheck that the memory card ACCESS lamp is lit green oroff when you turn off the power or remove a memorycard.Label