Sony AWS-G500 Operating Instructions Manual

Also see for Anycast station AWS-G500: Operating instructions

Contents

Chapter 3 Operations84 Video Switching2 Select the effect pattern.To change the effect pattern, follow the procedure in “Changing the EffectPattern” (page 85).3 Determine the next program output video, and select this with the NEXTselection button.The selected video appears in the PVW viewer.4 Carry out the transition with the AUTO TRANS button or transition lever.The program output video changes to the NEXT selection video by a wipetransition.Each press of the AUTO TRANS button, or operation of the transition lever,the program output video changes to the NEXT selection video by a wipetransition.You can apply an edge effect to the wipe pattern. For details, see “Applying EdgeEffects” (page 109).Changing the Transition TimeBefore carrying out a transition with the AUTO TRANS button, set the transitiontime.1 Press the MIX button or EFFECT button.The current settings appear in the effect display.2 Press the MENU button.3 In the top menu, select [Video Effect].4 1 Select [Transition Time], and confirm; 2 move the slider to set thetransition time.The transition time is set in frame units.5 Press the MENU button to close the menu.The set transition time appears in the effect display.NoteEffect PatternTransition Time 20FEdge OffKey Type LuminanceKey Adjust1 2