18GBYou can record a whole CD on a tape.You can use TYPE I (normal) tape.Use buttons on the unit for the operation.1 Load a recordable tape.2 Load a CD you want to record.If you have already loaded the disc, pressDISC 1 – 5 to select the disc, then press x.When you want to record an album from anMP3 disc, be sure to press PLAY MODErepeatedly to select ALBM, then useALBUM – or + on the remote to select thedesired album before proceeding.3 Press CD SYNC.“CD SYNCHRO” appears. “REC” flashes.The tape deck stands by for recording andthe CD player pauses for play.4 Press DIRECTION repeatedly until gappears to record on one side or h (orj) to record on both sides.5 Press TAPE nN repeatedly to selectrecording side.If you select both sides recording or frontside recording, press TAPE nN to lightup the N indicator. If you record on thereverse side, press TAPE nN again tolight up the n indicator.6 Press z REC PAUSE/START.Recording starts.When the recording is completed, the CDplayer and the tape deck stop automatically.To stop recordingPress x.To record a disc by specifyingtrack orderYou can record only your favorite CD tracksusing Program Play. Between steps 2 and 3,perform steps 1 to 6 of “Creating your ownprogram” (page 13).TipIf you select both sides recording and the tape reachesthe end of the front side part-way through a track, theentire track is recorded again from the beginning of thereverse side.Tape – RecordingRecording your favoriteCD tracks on a tape— CD-TAPE Synchro Recording