Settings and Adjustments71USAdjusting the speaker volume andlevel1 After you stop playback, select“SPEAKER SETUP” after pressing DVDSETUP in the Setup Display.2 Select “TEST TONE” and set “TESTTONE” to “ON.”You will hear the test tone from eachspeaker in sequence.3 From your listening position, select“BALANCE” or “LEVEL” and adjust thevalue of “BALANCE” and “LEVEL” usingX/x.The test tone is emitted from both leftand right speakers simultaneously.4 Select “TEST TONE” and set “TESTTONE” to “OFF” to turn off the testtone.NoteWhen you adjust the speaker settings, the sound cutsoff for a moment.The test tone is not emitted from thespeakers.The test tone is emitted from eachspeaker in sequence while adjustingbalance or level.When you select one of the“SPEAKER SETUP” items, the testtone is emitted from both left andright speakers simultaneously.xBALANCEYou can vary the balance of the left and rightspeakers as follows. Be sure to set “TESTTONE” to “ON” for easy adjustment.The default settings are underlined.FRONTCENTERREARCENTERTo adjust the volume of all thespeakers at one timeUse the VOLUME control on the receiver orpress VOLUME +/–.xTEST TONEThe speakers will emit a test tone to adjust“BALANCE” and “LEVEL.”OFFONAdjust the balance between thefront left and right speakers (Youcan adjust from center 6 steps leftor right).Adjust the balance between the rearleft and right speakers (You canadjust from center 6 steps left orright).
