Sony AIR-SW10TI - Wireless Audio Transmitter Component Manual

Also see for AIR-SW10Ti: Manual Quick setup guide Operating instructions Specifications

©2009 Sony Corporation Printed in China 4-152-274-11(1)EnglishTo stabilize S-AIR receptionRead the following when S-AIR reception is poor or unstable.To use S-AIR products (S-AIR main unit, subwoofer, and the optionalsub unit)Before using S-AIR products, have the following ready.Confirm the wireless transceivers are insertedcorrectly.Insert the wireless transceivers firmly to the depthinto the slots of the S-AIR main unit, subwoofer,and the optional sub unit, respectively.Confirm that the S-AIR IDs of the S-AIR mainunit, subwoofer, and the optional sub unit arethe same.The default setting of the S-AIR IDs of the S-AIRmain unit, subwoofer, and the optional sub unit is “A.”Depending on the S-AIR product, you can set theS-AIR ID by the switch or the setup menu.For details, refer to the operating instructions ofeach S-AIR product.About environments where S-AIR products (S-AIR main unit,subwoofer, and the optional sub unit) are usedS-AIR products use a radio frequency of 2.4 GHz. Certain electronic equipment or other factors maycause lost connection or instability in S-AIR reception.Electronic equipment influenceThe following may cause interference or cross talk.Cellular phones, cordless phonesWireless LAN, personal computersGame machines using radio signalsMicrowave ovensOther factorsThe following may cause poor reception.Materials or structures, such as walls and floorsThe location where an S-AIR product is placedWhen using S-AIR products, place them as far as possible from the above electronic equipment, orplace where S-AIR reception is stable.•••––––•––When S-AIR reception is poorCheck the following.Keep cords that are connected to the S-AIR product (power cord, antennas or other cords) away fromthe wireless transceiver and slot.Keep as much space as possible around S-AIR products.Avoid placing S-AIR products on top of, or directly below, other electronic equipment.Avoid placing S-AIR products in a closed rack, metal rack, or under a table.Adjust the location (height, orientation, and place in the room) of S-AIR products until reception isthe most stable.Place so that the wireless transceivers of the S-AIR main unit, subwoofer, and the optional sub unit arecloser.Place so that S-AIR products are separated from other wireless devices.Place so that S-AIR products are separated from metal doors or tables.If you cannot improve S-AIR reception, change the “RF CHANGE” setting. For details, refer to theoperating instructions of each S-AIR product.Same S-AIR IDAS-AIR IDBCTUNINGTUNERiPodVOLUMESTANDBYInsert firmlyAIR-SW10Ti

/ 2

Related manuals for Sony AIR-SW10Ti