Sony 480p Operating Instructions Manual

Contents

82If you make a mistake entering yourpasswordPress C before you press ENTER and inputthe correct number.If you make a mistakePress O RETURN.To turn off the displayPress DISPLAY/FILE repeatedly until thedisplay is turned off.Controlling Your TV or AVAmplifier (Receiver) Withthe Supplied RemoteBy adjusting the remote signal, you cancontrol your TV with the supplied remote.If you connect the player to an AV amplifier(receiver), you can control the volume withthe supplied remote.Notes• Depending on the unit being connected, you maynot be able to control your TV using some of thebuttons below.• If you enter a new code number, the code numberpreviously entered will be erased.• When you replace the remote’s batteries, the codenumber you have set may be reset to the defaultsetting. Set the appropriate code number again.Controlling TVs with the remote1 Slide the TV/DISC EXPLORER/DVDswitch to TV.2 Hold down [/1, and enter themanufacturer’s code for your TV usingthe number buttons (see “Codenumbers of controllable TVs” below).3 Release [/1.When the TV/DISC EXPLORER/DVDswitch is set to TV, the remote performs thefollowing:Numberbuttons[/1VOL +/–TV/VIDEOWIDE MODEENTERTV/DISCEXPLORER/DVD switch