1Adjusting network settingsUSAdjusting custom settingsIn certain network environments, some settings may not be adjustedautomatically by selecting [Easy]. Refer to the information below andalso follow the on-screen instructions to adjust custom settings.Ethernet operation modeSpecify the Ethernet data transfer rate and operation method. You canusually select [Auto-Detect].IP Address SettingSpecify the method for obtaining an IP address when connecting to theInternet. The method varies depending on the Internet service provideryou use.Automatic Use the IP address allocated by the DHCP server.Manual Enter the IP address manually.PPPoE Connect to the Internet using PPPoE. Enter the user nameand password supplied by your Internet service provider.DHCP host nameSpecify the DHCP server host name. You can usually select [Do Not Set].DNS SettingSpecify the DNS server. The method varies depending on the Internetservice provider you use.Automatic System acquires the DNS server address automatically.ManualEnter the DNS server address manually. Enter the IPaddresses of the primary and secondary DNS servers thatare supplied by your Internet service provider.MTUSpecify the MTU value used when transmitting data. You can usuallyselect [Automatic].Proxy ServerSpecify the proxy server to be used. You can usually select [Do Not Use].UPnPEnable or disable UPnP (Universal Plug and Play). You can usuallyselect [Enable].HintIf [UPnP] is set to [Disable], online communication may be restricted when usingthe voice / video chat feature or communication features in games.