Siemens sitrans p Operating Instructions Manual

Also see for SITRANS P: Brochure & specs Operating instructions Compact operating instructions Compact operating instructions Compact operating instructions

Contents

Operating Instructions30 SITRANS P CompactA5E00240593-01! WARNINGNotes for the operation of the intrinsically safe version in hazardous areas:Operation is only permissible on certified intrinsically safe circuits- The transmittercorresponds to category II 2G.The EC type test certificate applies for installation of the device in the walls of vessels andpipes in which explosive gas/air or vapour/air mixtures occur only under atmosphericconditions (pressure: 0.8 bar to 1.1 bar; temperature: -20 °C to +60 °C). The permissiblerange of the ambient temperature is -40 °C to +85 °C, in hazardous areas -40 °C up to amaximum +85 °C (at T4).The owner may use the device under non-atmospheric conditions outside the limitsspecified in the EC type test certificate (or the test certificate valid in his country) on hisown responsibility if additional safety precautions have been taken according to theconditions of application (explosive mixture). The limits specified in the technical data(page 32) must be observed in any case.