Siemens iQ500 User Manual And Installation Instructions

Also see for IQ500: User manual Operating instructions User manual Installation instructions Instructions for installation and use

en Cleaning and servicing40Changing the basic settings1. Set the programme selector to po-sition 1.2. Press Spin Speed and, at thesame time, turn the programmeselector to position 2.a The display shows the currentvalue.3. Set the programme selector to therequired position.4. To change the value, press ReadyIn.5. To save the changes, switch offthe appliance.Cleaning and servicingCleaning and servicingCleaning and servicingTo keep your appliance working effi-ciently for a long time, it is importantto clean and maintain it carefully.Tips on appliance careFollow the tips for appliance care toensure your appliance works cor-rectly in the long term.Wipe down the hous-ing and the controlpanel with nothing butwater and a dampcloth.The appliance partsremain clean and hy-gienic.Remove all detergentresidue, spray residueor other residues im-mediately.Fresh deposits areeasier to removewithout leaving anyresidue.Keep the appliancedoor and detergentdrawer open afteruse.This allows the resid-ual water to dry, redu-cing odours in the ap-pliance.Cleaning the drumIf you often wash at a washing tem-perature of 40 °C and lower or theappliance has not been used for along period, clean the drum.CAUTIONRisk of injury!Permanently washing at low temper-atures and a lack of ventilation forthe appliance may damage the drumand cause injury.▶ Regularly run a programme forcleaning the drum or wash at tem-peratures of at least 60 °C.▶ Leave the appliance to dry afterevery operation with the dooropen, and leave the detergentdrawer to dry.▶ Run the Drum Clean programmewithout laundry.Add washing powder.Cleaning the detergent drawerNote: Please read the information inthe "Safety" → Page 4 and "Prevent-ing material damage" → Page 11 sec-tions to ensure that you use the appli-ance safely.1. Pull out the detergent drawer.