Siemens TA6JG20 Installation Instructions Manual

83 / 3Turn off and lock out all power supplying this device beforeworking on this device.Replace all covers before power supplying this device isturned on.Couper l'alimentation de l'appareil et barrer avant detravailler.Remplacez touts les couverts avant quel'approvisionnement de pouvoir soit alimenté.Tensión peligrosa.Puede causar la muerte o lesiones graves.Tension dangereuse.Danger de mort ou risque de blessures graves.Hazardous Voltage.Will cause death or serious injury.Desenergice totalmente antes de instalar o darle servicio.Reemplace todas las barreras y cubiertas antes deenergizar el interruptor.Turn off and lock out all power supplying this device beforeworking on this device.Replace all covers before power supplying this device isturned on.Couper l'alimentation de l'appareil et barrer avant detravailler.Remplacez touts les couverts avant quel'approvisionnement de pouvoir soit alimenté.Tensión peligrosa.Puede causar la muerte o lesiones graves.Tension dangereuse.Danger de mort ou risque de blessures graves.Hazardous Voltage.Will cause death or serious injury.Desenergice totalmente antes de instalar o darle servicio.Reemplace todas las barreras y cubiertas antes deenergizar el interruptor.BAC CBA1/8”3/16”TA6JG20 3VL9402-4TP013TA6JG20 3VL9402-4TP31 TA12JG04 3VL9404-4TP013TA12JG04 3VL9404-4TP31For Support in Europe refer to :Bestell-Nr. / Order No.: 3ZX1012-0VL68-2BA1 Internet: www.siemens.de/lowvoltage/technical-assistance GWA 4NEB 179 6941-10 DS 04806941A031978 AWG[ 6 mm2 ]40 lb. in [ 4.5 Nm ]Cu14 – 4 AWG[ 2.5 – 16 mm² ]Al8 – 4 AWG[ 10 – 16 mm² ]Cu / Al14 – 2 AWG[ 2.5 – 35 mm² ]Wire Strip Length[ Quitar ]Wire Connector[ Conexión delcable ]C60°C and 75°CWire Size[ Rango Cable ]Torque[ Esfuerzo detorsión ]AUL 486A - 486BReq. Wire Stranding( Cable )CUClassCCU / ALClassBBTA6JG203TA6JG203VL9402-4TP013VL9402-4TP31TA12JG043TA12JG043VL9404-4TP013VL9404-4TP316 – 2/0 AWG[ 16 – 50 mm2 ]120 lb. in. [ 14 Nm ]14 – 10 AWG[ 2.5 - 4 mm2 ]35 lb. in. [ 4 Nm ]1973719Cu / Al1 – 2/0 AWG[ 50 mm² ]14 - 8 AWG[ 2.5 – 6 mm2 ]35 lb. in.[ 4 Nm ]6 - 4 AWG[ 10 – 16mm2 ]50 lb. in.[ 5.6 Nm ].50 - .62[ 13 – 15mm ]1.00 – 1.13[ 25 - 28mm ]1.62 – 1.75[ 41 - 44mm ].57 - .69[ 15 – 17mm ]1.12 – 1.25[ 28 - 32mm ]1.25 – 1.38[ 32 - 35mm ]Subject to change without prior notice © Siemens Industry Inc. 2010Siemens Industry, Inc. , Norcross, GA 30092 U.S.A.Technical Support: Toll Free: 1-800-241-4453 Internet: www.usa.siemens.com/powerdistribution

/ 3

Related manuals for Siemens 3TA12JG04