Siemens SN43HW70CS User Manual

Also see for iQ 300 varioPerfect: User manual User manual Operating instructions Repair hints Operating instructions

en Basic settings34Basic settingsBasic settingsBasic settingsYou can configure the appliance to meet your needs.Overview of basic settingsThe basic settings depend on the features of your appliance.Basic setting Display text Selection DescriptionWater hardness H04 1 H00 - H07 Set the water softening system toyour water hardness.→ "Setting the water softening sys-tem", Page 24Level H00 switches the water soften-ing system off.Rinse aid dispensing r05 1 r00 - r06 Set the amount of rinse aid to be dis-pensed.→ "Setting the amount of rinse aid",Page 27Switch the rinse aid system off withlevel r00.Intensive drying d00 1 d00 - d01 The temperature is increased duringthe final rinse, which improves thedrying result. This may increase therun time slightly.Note: Not suitable for delicate itemsof tableware.Switch Extra Dry on "d01" or off"d00".Hot water A00 1 A00 - A01 Set cold water or hot water connec-tion. Only set the appliance to hotwater if this can be prepared withlittle energy and a suitable installa-tion is available, e.g. solar heatingsystem with circulation line. The wa-ter temperature should be at least40 °C and max. 60 °C.Switch hot water on "A01" or off"A00".Wi-Fi Cn0 1 Cn0 - Cn1 Switch the wireless network connec-tion on or off.Level "Cn0" switches the wirelessnetwork connection off.1 Factory setting (may vary according to model)