Siemens SINUMERIK 840D sl Upgrade Instructions

Also see for SINUMERIK 840D sl: Manual Function manual Function manual Function manual Function manual

SINUMERIK 840D sl 2014-12-16Upgrade InstructionsSINUMERIK Operate 4.5 SP4 HF3 for PC© Siemens AG 2014 I DT MC R&D 5 Page 1 of 3All rights reserved_________________________________________________________________________________________SINUMERIK Operate 04.05.04.03 (internal version 04.05.04.03.001) for PC_________________________________________________________________________________________A PC comprising the German or English Windows 7 network card, min. 4GB RAM and 10GB free hard diskmemory is required in order to install this software.Installation on a PC with German or English Windows XP SP3 (32Bit) is also possible.The commissioning instructions for SINUMERIK Operate 4.5 SP2, PCU base software V1.3 or Win7 V1.0, thedevice manual, operating components and the operating instructions SINUMERIK Operate 4.5 SP2 apply.Further, the secondary conditions published for CNC software 4.5 SP4 must be taken into account.SINUMERIK Operate comprises all texts in German, English, French, Italian, Spanish and “Chinese simplified“.In general, the help for setting and machine data is only provided in German and English. Language extensionsV4.5.2 for SINUMERIK Operate can be used.SINUMERIK Operate 4.5 SP4 HFx has only been released for operation with a 840D sl NCU7x0.3 with CNCSoftware 4.5 SP4 HFx.To do this, the PC must be integrated in the plant / system network. As standard, the SINUMERIK Operate logsitself into the system with the NCU address 192.168.214.1. The NCU address can be set in the screen "NCUconnection" under Commissioning / HMI.Note: If the PC is connected at X130 of the NCU via the company network, the simulation can no longer run.This is the reason that SINUMERIK Operate 4.5 SPx and HMI-Advanced 7.6 SP2 resp. Startup Tool 7.7 can beinstalled in parallel on a PC / PG. However, only one of the two HMIs can be started.The SINUMERIK Operate for PC does not include any technological cycles or measuring and ISO cycles. Theseare only available on the CF card of the NCU and automatically installed during the NCU startup – see also therelevant information provided in the Upgrade Instructions for the CNC Software 4.5 SP4 HFx.User texts must always be downloaded into the system in the UTF-8 format.SINUMERIK Operate for PC does not have a general access to the CF card of the NCU. This means that option"user memory on CF card of the NCU" cannot be used.The "Local drive" in SINUMERIK Operate for PC is located on the hard disk under\user\sinumerik\data and is always available without option.InstallationImportant: If a version < 4.5 SP2 of SINUMERIK Operate for PC has already been installed, then it must first beuninstalled under Control Panel /Add or Remove Programs. In addition, manually delete the directoryF:\hmisl\snck.SINUMERIK Operate is installed by calling the file Setup_HMIsl_......exe on the DVD delivered.The installation directory can be freely selected.The path and the directory may include blanks, but no special characters and language-specific umlauts.The standard program directory of Windows (C:\Programs resp. C:\Program Files) may not be used.The installation version is requested during the installation:x Operation on a SINUMERIK NCU (default)x Operation on a SIMATIC-CPU 317 / 319x Integration of .NET-Framework for OEM applications

/ 3

Related manuals for Siemens SINUMERIK 840D sl