Siemens SINUMERIK 840D sl Upgrade Instructions

Also see for SINUMERIK 840D sl: Manual Function manual Function manual Function manual Function manual

SINUMERIK 840D sl 2014-10-28Upgrade InstructionsSINUMERIK Operate 4.5 SP4 for PCU 50.5© Siemens AG 2014 I DT MC R&D 5 Page 1 of 4All rights reserved_________________________________________________________________________________________SINUMERIK Operate 04.05.04.00 (internal Version 04.05.04.00.010) for PCU 50.5_________________________________________________________________________________________A PCU 50.5 with pre-installed PCU base software WinXP from V1.3 or a PCU 50.5 with pre-installed PCU basesoftware Win7 V1.0 is required in order to install this software::- PCU 50.5-C/XP 6FC5210-0DF52-2AA0 with PCU base software from V1.3- PCU 50.5-P/XP 6FC5210-0DF53-2AA0 with PCU base software from V1.3- PCU 50.5-C/W7 6FC5210-0DF52-3AA0 with PCU base software from V1.0- PCU 50.5-P/W7 6FC5210-0DF53-3AA0 with PCU base software from V1.0The Commissioning Guide for SINUMERIK Operate Operate 4.5 SP2, PCU base software V1.3 or Win7 V1.0,the Operator Components Manual and the Operating Manual SINUMERIK Operate 4.5 SP2 apply.Furthermore, the supplementary conditions published for CNC Software 4.5 SP4 must be taken into account.Before using SINUMERIK Integrate for Production (SIP), please read the notes provided in the Annex"SINUMERIK_Integrate_liesmich_Operate_45SP4.pdf".SINUMERIK Operate comprises all texts in German, English, French, Italian, Spanish and “Chinese simplified“.In general, the help for setting and machine data is only provided in German and English. The V2.7.1 additionallanguages for SINUMERIK Operate can be used.SINUMERIK Operate 4.5 SP4 has only been released for operatingx an 840D sl NCU7x0 with CNC Software 4.5 SP4 or for ax SIMATIC-CPU 317 / 319 in combination with HMI Pro sl.To do this, the PCU 50 must be integrated in the plant / system network. By default, the SINUMERIK Operate isconnected to the NCU address 192.168.214.1. The NCU address can be set in the "NCU connection" screenunder Commissioning / HMI.Note for laboratory operation: When connecting the PCU 50 to the X130 of the NCU, the simulation cannot beexecuted.The SINUMERIK Operate for PCU 50 does not include any technological cycles or measuring and ISO cycles.These are available on the CF card of the NCU and are automatically installed during the NCU startup – seealso the relevant information provided in the Upgrade Instructions for the CNC Software 4.5 SP4.User texts must always be downloaded into the system in the UTF-8 format.SINUMERIK Operate for PCU 50 does not have general access to the CF card of the NCU. This means thatoption "user memory on CF card of the NCU" cannot be used.The "Local drive" in SINUMERIK Operate for PCU 50 is located on the hard disk underF:\hmisl\user\sinumerik\data and is always available without option.STEP7 5.5 for SINUMERIK PCU 50 can also be integrated for SINUMERIK Operate. The desktop function"Step7 authorization" is used for this purpose.Important note for operation on PCU 50.5 Windows 7:Before deactivating the power supply of the PCU 50.5, shut down the system via the Operate softkey EXIT resp.Windows shutdown, analogously to a PC with Windows 7. You can use a UPS to protect the system againstunexpected power cuts.The EXIT softkey can be made accessible to all operators by setting the display MD 9110 = 7.InstallationImportant: If a version <= 4.5 SP2 of SINUMERIK Operate for PCU 50 has already been installed, it must first be

/ 4

Related manuals for Siemens SINUMERIK 840D sl