Siemens SINUMERIK 840D sl Operating Manual

Also see for SINUMERIK 828D Turning: Diagnostic manual Function manual Equipment manual Programming manual Operating manual

Contents

Alarm, error, and system messages13.1 Displaying alarmsMilling628 Operating Manual, 03/2013, 6FC5398-7CP40-3BA1The "Hide SI alarms" softkey is displayed if safety alarms are pending.3. Press the "Hide SI alarms" softkey if you do not wish to display SIalarms....4. Position the cursor on an alarm.5. Press the key that is specified as acknowledgement symbol to deletethe alarm.- OR -Press the "Delete HMI alarm" softkey to cancel an HMI alarm.- OR -Press the "Acknowledge alarm" softkey to delete a PLC alarm of the SQtype (alarm number as of 800000).The softkeys are activated when the cursor is on the correspondingalarm.Acknowledgement symbolsSymbol MeaningTurn the unit off and back on (main switch), or press NCK POWER ON.Press the key....Press the key.- OR -Press the "Acknowl. HMI alarm" softkey.Press the key provided by the manufacturer.Machine manufacturerPlease refer to the machine manufacturer's specifications.