Siemens SINUMERIK 840D sl Manual

Also see for SINUMERIK 840D sl: Manual Function manual Function manual Function manual Function manual

5.4.8.2 Diagnostics options during bootingDiagnostics while booting supplementary conditionsIn the following supplementary conditions, the diagnostics window is displayed and booting ofthe TCU is interrupted:● When the <1 / F1> function is selected during booting● When a warning message is displayed● When a fault occursYou can select functions <1 / F1> to <8 / F8> mentioned below by tapping on the Panel.Alternatively, you can do this via the corresponding function keys of a connected USBkeyboard.Using the <1 / F1> function7hin Client BootloaderBoot ProgressBIOS VersionMAC AddressHardware-IDNetwork linkBoot from USBIP AddressNetmaskDHCP ServerBoot ServerImage MetadataImage VersionLinux Image (linux.bin)Image KindBooting<1/F1> protocol <2/F2> Readme_OSS <7/F7> continue <8/F8> rebootV05.00.45.00V15.00.00.0008:06:00:F1:F7:F87.9.2.01000MB, full duplexno device found192.168.214.14255.255.255.0192.168.214.1192.168.214.171 bytesV05.00.46.003295436 bytesfrom boot serverreadyKey / text MeaningF1 protocol Display detailed informationF2 Readme_OSS Details of the Open Source licensesF7 continue Continue booting of the TCUF8 reboot Restart the TCUNetworking5.4 Service and diagnosticsOperator panel front: OP 012Manual, 05/2019, A5E36371591B AB 73