Siemens SINUMERIK 840D Installation Manual

Also see for SINUMERIK 828D Turning: Diagnostic manual Function manual Equipment manual Programming manual Operating manual

Contents

4. Right-click on the required IIS page (default: SinInt) and select "Edit Bindings".The "Site Bindings" window opens. The port settings are listed.Click "Add..."The "Add Site Binding" window opens.Make the required settings, e. g.:– Type: "https"– IP address: "" or ""– Port: 443– SSL certificate: Click "Select" to select the certificate.Note:Do not activate the "Require Server Name Indication" checkbox. Otherwise communicationproblems may occur.Click "OK".- OR-If HTTPS is to be configured with the use of a DNS name (host name), open the "SiteBindings" window.– Click "Edit...".– The "Edit Site Binding" windows opensFill the "Host name" field in IIS.Setting up an encrypted connection5.1 Certificate on the serverManage MyResources, Optimize MyProgramming /NX-Cam EditorInstallation Manual, 12/2019, A5E44672080B AE 113