Siemens SINUMERIK 828D Operating Manual

Also see for SINUMERIK 828D Turning: Diagnostic manual Function manual Equipment manual Programming manual Operating manual

Contents

Introduction1.4 User interfaceHMI sl MillingOperating Manual, 06/2009, 6FC5398-7CP20-0BA0 45Calling a topic in the table of contents1. Press the "Table of contents" softkey.Depending on which technology you are using, the "HMI sl Milling","HMI sl Turning" or "HMI sl Universal" Operating and CommissioningManuals as well as the "Programming" Manual are displayed.2. Select the desired manual with the and keys.3 Press the or key or double-click to open themanual and the chapter.4. Navigate to the desired topic with the "Cursor down" key.5. Press the softkey or the key to displaythe help page for the selected topic.6. Press the "Current topic" softkey to return to the original help.Searching for a topic1. Press the "Search" softkey.The "Search in Help for: " window is opened.2. Activate the "Full text " checkbox to search in all help pages.If the checkbox is not activated, a search is performed in the table ofcontents and in the index.3. Enter the desired keyword in the "Text" field and press the "OK"softkey.If you enter the search term on the machine control panel, replace anaccented character with an asterisk (*) as dummy.All entered terms and sentences are sought with an AND operation. Inthis way, only documents and entries that satisfy all the search criteriaare displayed.4. Press the "Keyword index" softkey if you only want to display theindex of the operating and programming manual.Displaying alarm descriptions and machine data1. If messages or alarms are pending in the "Alarms", "Messages" or"Alarm Log" window, position the cursor at the appropriate display andpress the or the key.The associated alarm description is displayed.