Installing software and network operation3.2 Settings for network drivesPCU Basesoftware (IM6)Commissioning Manual, 10/2006, 6FC5397-0DP10-0BA0 3-132. Enter the letter of the PCU drive from which the connection must be accessed (e.g., "G").---------------------------------------------------------------------------------------------------------------Letter for Network Drive:---------------------------------------------------------------------------------------------------------------3. Enter the computer name of the PG/PC and the name of the directory (share name) thatyou wish to access. A screenform opens containing data for the PG/PC connection:---------------------------------------------------------------------------------------------------------------Directory to be mounted (e.g., \\r3344\HMINEW):------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Machine Name: PCU_1_NameUser Name: auduserTransport Protocol: NETBEUILogon to domain: NoConnect Network Drive (last): G: (\\r3344\HMINEW)PLEASE SELECT1 Connect to Network Drive2 Show connected Network Drives3 Disconnect from all Network Drives4 Change Network Settings9 Back to previous MenuYour choice [1, 2, 3, 4, 9]:?---------------------------------------------------------------------------------------------------------------2 Show connected Network DrivesThe current status of the connected drives is displayed:---------------------------------------------------------------------------------------------------------------Status: OKLocal Name: G:Remote Name: \\r3344\HMINEWStatus: OKLocal Name: H:Remote Name: \\r3344\HMI_P1Press any key to continue ...---------------------------------------------------------------------------------------------------------------