Siemens SIMOGEAR BA 2039 Operating Instructions Manual

Also see for SIMOGEAR BA 2039: Operating instructions

BA 2039 (2KJ4)Operating Instructions, 12/2022, A5E50009089A/RS-AJ 17Specific safety instructions 22.1 General overviewNoteSiemens AG does not accept any liability for damage and failures that result from the non-observance of these operating instructions.NoteEuropean RoHS directiveSIMOGEAR geared motors comply with the stipulations laid down in Directive 2011/65/EU.These operating instructions are part of the gearbox delivery. Store the operating instructionsnear the gearbox. Please read the operating instructions prior to handling the gearbox andobserve the information they contain. This is the best way of ensuring safe and trouble-freeoperation.The operating instructions supplement the SIMOGEAR gearbox operating instructionsBA 2030 (2KJ4).These operating instructions apply to the adapters of the standard SIMOGEAR gearboxversion:• Adapter KS - coupling adapter only for fitting a SIEMENS servomotor of theSIMOTICS S-1FK7/1FT7, SIMOTICS M-1PH8, SIMOTICS S-1FK2, SIMOTICS S-1FL6,SIMOTICS M-1PH1, and SIMOTICS M-1PH3 series• Adapter K2 - adapter with flexible coupling for fitting an IEC motor• Adapter K4 - short adapter with plug-in parts for fitting an IEC motor• Adapter K8 - coupling adapter for fitting a servomotor of theSIMOTICS M-1PH8 series• Adapter A, AZ - adapter with free drive shaftTable 2- 1 Article number codeSIMOGEAR adapter Article number position12SupplementAdapter KS for mounting a SIEMENS servomotor 1 -Adapter K2 for fitting an IEC motor 2 -Short adapter K4 for fitting an IEC motor 4 -Adapter K8 for fitting a servomotor 8 -Adapter A 9 M1AAdapter AZ 9 M1BExample of an article number code for a SIMOGEAR gearbox with coupling adapter KS2KJ4xxx-xxA01-xxxx.