Siemens SIMATIC Operating Instructions Manual

Also see for SIMATIC: Manual Manual Manual Manual Product information

Contents

PrefaceET 200pro Distributed I/O System - Fail-Safe ModulesOperating Instructions, 05/2007, A5E00394073-02 5Position in the Information LandscapeWhen working with ET 200pro fail-safe modules and depending on your particularapplication, you will need to consult the additional documentation listed below.References to additional documentation are included in this manual where appropriate.Documentation Brief Description of Relevant ContentsET 200pro Distributed I/OSystem ManualDescribes all generally applicable topics for the ET 200pro hardware (includingconfiguration, installation, and wiring of ET 200pro)Safety Engineering inSIMATIC S7 SystemDescription• Provides an overview of the application, configuration, and method of operation ofS7 Distributed Safety and S7 F/FH Systems fail-safe automation systems• Contains a summary of detailed technical information concerning fail-safe engineeringin S7-300 and S7-400• Includes monitoring and response time calculations for S7 Distributed Safety andS7 F/FH Systems fail-safe systemsThe following elements are described in theS7 Distributed Safety Configuring andProgramming Operating Manual and Online Help:• Configuration of the F-CPU and the F-I/O• Programming of the F-CPU in F-FBD or F-LADFor integration in theS7 Distributed Safety fail-safesystemDepending on which F-CPU you are using, you will need the following documentation:• TheS7-300, CPU 31xC and CPU 31x Operating Instructions: Installation describes theassembly and wiring of S7-300 systems.• TheCPU 31xC and CPU 31x, Technical Data Manual describes the standard functionsof the CPU 315-2 DP and PN/DP and the CPU 317-2 DP and PN/DP.• TheAutomation System S7-400 Hardware and Installation Installation Manualdescribes the assembly and wiring of S7-400 systems.• TheAutomation System S7-400 CPU Specifications Reference Manual describesCPU 416-2.• Each applicable F-CPU has its own product information bulletin. These productinformation bulletins describe only the deviations from the relevant standard CPUs.STEP 7 manuals • TheConfiguring Hardware and Communication Connections with STEP 7 V5.x Manualdescribes the operation of the relevant standard tools ofSTEP 7.• TheSystem Software for S7-300/400 System and Standard Functions ReferenceManual describes functions for distributed I/O access and diagnostics.STEP 7 Online Help • Describes how to operate the standard tools ofSTEP 7• Contains information about how to configure and assign parameters for modules andintelligent slaves withHW Config• Contains a description of the FBD and LAD programming languagesPCS 7 manuals • Describe how to operate thePCS 7 process control system (required when ET 200prowith fail-safe modules is integrated in a higher-level control system).The entire SIMATIC S7 documentation is available on CD-ROM.