Siemens SIMATIC NET RUGGEDCOM RX1510 Equipment Manual

Also see for SIMATIC NET RUGGEDCOM RX1510: Installation manual Installation manual Installation manual Installation manual

Technical Specifications5.4 Failsafe Relay Specifications5.4 Failsafe Relay SpecificationsMaximum Switching Voltage Rated Switching Current Isolation30 VDC 5 A125 VDC 0.1 Aa, 0.15 Ab250 VAC 6.25 A2800 VDC for 1 minutebetween coil and contactsa Inductive load R/L = 7 msb Resistive load5.5 Operating EnvironmentThe RUGGEDCOM RX1510 is rated to operate under the following environmentalconditions.NoteTemperature limits for select line modules may differ from that which can bewithstood by the RUGGEDCOM RX1510. Make sure the selected modules arerated for the expected environmental conditions before deployment. For moreinformation, refer to the "RUGGEDCOM RX1510 Series Modules Catalog".Ambient OperatingTemperatureab -40 to 85 °C (-40 to 185 °F)Ambient Storage Temperature -40 to 85 °C (-40 to 185 °F)Ambient Relative Humidityc 5% to 95%Maximum Altitude 2000 m (6562 ft)a Measured from a 30 cm (12 in) radius surrounding the center of the enclosure.b Operating temperature may vary based on the limitations of installed SFPs. Refer to the "RUGGEDCOM SFP Transceivers Catalog" forSFP temperature ratings.c Non-condensing.5.6 Mechanical SpecificationsWeight Approximately 5.0 kg (11 lb)Ingress Protection IP30Enclosure Aluminum5.7 Dimension DrawingsNoteAll dimensions are in millimeters, unless otherwise stated.36 RUGGEDCOM RX1510Equipment Manual, 10/2023, C79000-G8976-1055-25