SIMATIC IdentRFID systemsIdent profile, Add-on instructionfor Rockwell systemsFunction Manual07/2020C79000-G8976-C410-04PrefaceIntroduction 1Description 2Configuring with Studio5000 Logix Designer 3Configuring theinstructions 4Diagnostics and errormessages 5Appendix AService & Support B

Siemens SIMATIC Ident Function Manual

SIMATIC Ident

Introduction

Abbreviations and naming conventions

Description

Area of application and scenarios

Components of the product and ordering data

Connecting hardware

The PC adapter for SIMATIC RF-DIAG

Pin assignment of the RS-422 interface

Technical specifications

Dimension drawing

Certificates and approvals

Connecting a serial reader

Software installation

Starting the software

Operating the software

The log area

Tab overview

The tabs of the RF640R/RF670R readers

The "Tag Data" tab

The "IO" tab

The "RSSI" tab

The "Tag Events" tab

The tabs of the RF620R/RF630R readers

The "Power Ramp" tab

The "Tag List" tab

The "Parameters" tab

The "VSWR" tab

The "Firmware-Update" tab

Application Examples

Example of an application "optimize antenna position

Example of an application "Determining transmit power

Example of an application "Setting the Power Ramp and RSSI Threshold

Example of an application "Testing and setting parameters for industrial UHF algorithms

Error and system messages

A.1 Service & Support

Range of functions

Installation

Adapting the registry

Parameter assignment

Programming interface

Error and status messages

Linking the driver into your own programs

Area of application and features

Building block structure

Differentiation from other program blocks

Overview of the Ident library

Setting the "IID_HW_CONNECT" data type

General structure of the function blocks

Programming Ident blocks

Read_MV

Reset_Reader

Set_MV_Program

Extended blocks

Inventory

Read_EPC_Mem

Read_TID

Read_UID

Set_Param

Write_EPC_ID

Write_EPC_Mem

AdvancedCMD

Reset blocks

Reset_MOBY_U

Reset_MV

Reset_RF200

Reset_RF300

Reset_RF600

Reset_Univ

Status blocks

Tag_Status

Programming the Ident profile

Structure of the Ident profile

Data structure of the Ident profile

Commands of the Ident profile

Command structure

Commands

Expanded commands for optical reader systems (MV400/MV500)

Effect of the commands

Editing commands

Parameter assignment for starting up and restarting

Command repetition

Transponder addressing

Structure of the "STATUS" output parameter

STEP 7 - error messages

Errors from the optical reader

Errors from the bus/backplane bus

A.1 Internal status parameter

A.2 Cyclic data

A.2.2 Cyclic status word

A.2.3 Using the acknowledgment and command counter

A.3 Service & Support

Safety notes

System overview

RFID components and their function

Overview of transponders

RF200 system planning

Width of the transmission window

Permissible directions of motion of the transponder

Dwell time of the transponder

Communication between communication module, reader and transponder

Impact of secondary fields

Field data of transponders and readers

Minimum clearances

Installation guidelines

Reduction of interference due to metal

Effects of metal on different transponders and readers

Impact of metal on the transmission window

RF210R

RF220R

RF240R

RF250R

RF260R

RF290R

Installation and connection of 2 to 6 antennas with one reader

Installation options with the antenna splitter (2-4 antennas)

Antenna installation

Installation options with the antenna multiplexer (2-6 antennas)

Readers

SIMATIC RF210R

Pin assignment RF210R with RS422 interface

Minimum distance between RF210R readers

Technical specifications of the RF210R reader

Approvals

SIMATIC RF220R

RF220R pin assignment with RS422 interface

Minimum distance between RF220R readers

Technical specifications of the RF220R reader

SIMATIC RF240R

Pin assignment RF240R

Minimum distance between several RF240R readers

Technical specifications of the RF240R reader

SIMATIC RF250R

Pin assignment RF250R

Technical specifications of the RF250R reader

SIMATIC RF260R

Pin assignment RF260R

Minimum distance between several RF260R

Technical data of the RF260R reader

SIMATIC RF290R

Pin assignment RF290R

Display elements of the RF290R reader

Installing the RF290R reader

Installing on the S7-300 standard rail

Technical specifications of the RF290R reader

Note on the use of the RF290R as a replacement for SLG D10 / SLG D10S

Antennas

Features

Transmission window

Flush-mounted in metal

SIMATIC RF200

Technical data

Operation in static and dynamic mode

Field data

Installation and connection of 2 to 6 antennas with one RF290R reader

Chemical resistance of the transponders

Polyphenylene sulfide (PPS)

Polycarbonate (PC)

Polyvinyl chloride (PVC)

PA6.6 GF30

Further information

SIMATIC RF210M

Installing the RF210M reader

Display elements of the RF210M reader

Ordering data RF290R

Mounting on/in metal

Operating / limit distances

legal information

safety information

technical specifications

Preface

Functions of the instructions

Configuring with Studio 5000 Logix Designer

Creating a Studio 5000 Logix Designer project

Configuring the instructions

Overview of the add-on instructions

General structure of the add-on instructions

Project preparation

Configuring the reset instruction

Programming add-on instructions

Basic instructions

Write

Extended instructions

Status instructions

RESET instructions

Assigning parameters for the instruction

Digital inputs/outputs

Errors from the communications module/reader

Errors from Ethernet/IP

Warnings

A.2 Service & Support

Navigating in the Function Manual

Configuration scheme

Data structures of FB 45

Number of RFID channels that can be connected

Addressing of the RFID channels

Parameterizing

INPUT parameters

Siemens SIMATIC Ident Function Manual

Product

Learn More

Legal