Siemens SIMATIC HMI Series Operating Instructions Manual

Also see for SIMATIC HMI series: Installation instructions Operating instructions Operating instructions Operating instructions System manual

Contents

Technical information7.1 Certificates and approvalsIFP V2, IFP V2 PRO84 Operating Instructions, 08/2019, A5E46641410-AAYou can download information on the EC Declaration of Conformity, here under the keyword"Declaration of Conformity":● IFP certificates (https://support.industry.siemens.com/cs/ww/en/ps/16788/cert)● IFP PRO certificates (https://support.industry.siemens.com/cs/ww/en/ps/21662/cert)UL approvalSee the following notes:● The device shall be supplied from an isolating source.● Only for use in LAN, not for connection to telecommunication circuits.Underwriters Laboratories Inc., to● UL 61010-2-201 (E116536)● CSA C22.2 No. 61010-2-201orUnderwriters Laboratories Inc., to● UL 61010-2-201 (E222109)● CSA C22.2 No. 61010-2-201● ANSI/ISA 12.12.01 (Hazardous Location)● CSA C22.2 No. 213 (Hazardous Location)Approved for use in● Class I, Division 2, Group A, B, C, D T4 or● Class I, Zone 2, Group IIC T4 or● non-hazardous locationsFM ApprovalFactory Mutual Research (FM) conforming to● Approval Standard Class Number 3611, 3600, 3810, ANSI/ISA 61010-1● CSA C22.2 No. 213● CSA C22.2 No. 61010-1Approved for use in● Class I, Division 2, Group A, B, C, D T4● Class I, Zone 2, Group IIC T4Installation Instructions for cFMus:WARNING – Do not remove or replace while circuit is live when a flammable or combustibleatmosphere is present.WARNING – Substitution of components may impair suitability of the equipment.