SIMATICET 200SP HARQ 4x120VDC-230VAC/5A CO HAEquipment Manual6DL1132-6HD50-0PK06DL1132-6HD50-0EK007/2022A5E39389042-AFSecurity information 1Preface 22D Matrix code (QR code /EAN code) 3Product overview 4Terminal 5Parameters 6Displays and interrupts 7Technical specifications 8Drivers, parameters,diagnostics messages andaddress space A

Siemens SIMATIC ET 200SP HA Equipment Manual

SIMATIC ET 200SP HA

Security information

Product overview

Wiring

Schematic circuit diagram

Parameters

Maintenance

Displays and interrupts

Interrupts

Technical specifications

A Diagnostic messages

Module/channel parameters

Explanation of the module/channel parameters

Measurement types and measuring ranges

A.1 Concept of the driver and diagnostics blocks

A.2 Parameter assignment

A.3 Parameter assignment and structure of the module and channel parameters

A.4 Diagnostics messages and maintenance events

A.5 Hardware interrupts

A.6 Address space

B.1 Representation of analog values in voltage measuring ranges

B.2 Representation of analog values for resistance-type sensors

B.3 Representation of analog values for thermal resistors

B.4 Representation of analog values for thermocouples

Index

Flutter monitoring

Diagnostics for changeover contact sensor type

A.3 Parameter assignment and structure of the module/channel parameters

Preface

A.5 Address space

HART mapping parameters

HART function

How HART works

HART applications

HART variables

A.4 Parameter assignment and structure of the HART mapping parameters

A.5 Diagnostics messages and maintenance events

A.6 Hardware interrupts

A.7 Address space

B.1 HART command interface

B.2 HART job and response data records

B.3 HART directory

B.4 HART feature data

B.5 HART variable data record

B.6 HART-specific settings

C.1 Representation of analog values in the current measuring ranges

A.7 Address space of the time stamping (accuracy 1 ms)

Installation

D matrix code (QR code / EAN code)

System overview

Basic components of the IO device

Accessories for the IO device

Plant planning

Basics

Special conditions for safe use of the ET 200SP HA

Potential relationships in the IO device

Hardware configuration

Selecting the carrier module

Forming potential groups

Configuration examples for potential groups

Terminal block with potential distributor (L+ potential)

Terminal block with potential distributor (M potential)

Redundancy and changes during operation

Connection of the IO device via system redundancy

Connection of the IO device via media redundancy

IO redundancy

Time synchronization and time stamping

Time synchronization and time stamping with a single CPU

Time synchronization and time stamping with redundant CPU

Minimum clearances in the control cabinet

Installing the rail

Mounting the interface module

Mounting an carrier module for I/O module slots

Installing the terminal block

Installing the server module and power bus cover

Markings of IO device components

Optional markings

Applying color-coded labels

Applying labeling strips

Applying reference identification labels

Rules and regulations for operation

Operation of the IO device on a grounded power supply

Wiring rules

Wiring the terminal block

Connecting cable shields

Connecting the power supply to the interface module

Connecting interfaces for communication

Connecting the BusAdapter

Inserting I/O modules or slot cover

Removing a server module and power bus cover

Removing a terminal block

Removing the carrier module

Removing a BusAdapter from the interface module

Removing the interface module

Removing the carrier module for the interface module

Removing I/O modules

Removing color-coded labels

Pulling and plugging modules in runtime (overview)

Set the I/O module to the maintenance position

Replacing an I/O module

Communication error "IO redundancy warning" (maintenance event: error code 121H)

Replacing an I/O module with another type

Replacing a terminal block

Removing wires

Resetting the interface module to factory settings

Firmware update for interface modules / I/O modules

Firmware update for the server module

CE marking

Explosion protection

cULus approval

Korea Certificate

Electromagnetic compatibility

Shipping and storage conditions

Mechanical and climatic environmental conditions

Information on insulation, protection class, degree of protection and rated voltage

Siemens SIMATIC ET 200SP HA Equipment Manual

Product

Learn More

Legal