Siemens SF24T252GB Operating Instructions Manual

Also see for dishwasher: Instructions for use Operating instructions Operating instructions Operating instructions Operating instructions

en6To ensure good washing results, thedishwasher requires soft water, i.e.containing low amounts of lime, otherwisewhite limescale will be deposited on theutensils and inner container.Tap water above 9° Clarke must besoftened. The water is softened with salt(regeneration salt) in the water softeningsystem of the dishwasher.The setting and therefore the requiredamount of salt depends on the degree ofhardness of your tap water (see table).SettingThe amount of salt dispensed can be setfrom ‹ to ˆ.Sal is not required at the set value ‹.– Find out about the hardnessvalue of your tap water. Your waterutility company will help you with this.– Set value can be found in the waterhardness table.– Close the door.– Hold down programme button +and switch on the main switch (.– Release both buttons.The LED for button + flashesand the digital display 8 displaysthe factory setting ….To change the setting:– Press programme button +.Each time the button is pressed,the set value increases by one level;when the value of ˆ has been reached,the display jumps back to ‹ (off).– Switch off the main switch (The chosen setting has now beenstored.Water hardness tableWater softening system !!!"!!!!!!!!!!"!!# $ $$% & '