Menu
Siemens S-40EXIT Instructions & Maintenance
                            |
7L IFTING RECOMMENDATIONSWeight (as shown)350 lbs.Weight (as shown)700 lbs.Mechanism only can belifted into place using thelifting eye provided1. Signal assembly must be withoutarm and counterweight.2. Lift point should be a minimumof 15" above gate mechanism.3. Lifting sling can be used aroundmast and under the junction boxcrossarm for lights as shown.Recommendations for lifting pre-assembledsignals with gate mechansim.DescriptionAdapter CastAdapter FabConversion Bracket (cast adapter)Conversion Bracke (fab adapter)J. B. Base Assy.Mast & J. B. Base (5" Alum.)Mast & J. B. Base (5" Alum.)Mast & J. B. Base Stud (5" Alum.)Sidelight CantileverCounterweight Std.Counterweight ShortCounterweight Stud PlateArm Supports (1 each)Arm Supports (1 each)R.R. Crossing Sign w/mtg. Hardware#2 Track Sign w/mtg. HardwareJ.B. Crossarm 2 Way w/FLX-12 Heads CompleteS-40EXIT Gate MechanismGalvanized Steel FoundationPart Number076203-510X076203-501X076227-X076227-22X041931-X070519-27AX070519-40AX070519-3AX041442-26X070755-4070755-34070757-26X070920-LX or070921-RX035200-17X or035236-2X042003-000616074008-X035903-911-1XDimensions14 feet - 0 inches16 feet - 0 inches7 feet - 0 inches15 x 30 x 1/2 inches15 x 15 x 5/8 inchesWeight28 lbs.20 lbs.75 lbs.55 lbs.85 lbs.140 lbs.160 lbs.100 lbs.38 lbs.63 lbs.38 lbs.15 lbs.72 lbs.30 lbs. each30 lbs. each40 lbs.25 lbs.110 lbs.350 lbs.200 lbs. |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved