CM2N3875en_042013-06-16 Building Technologiess 3 875RXBRoom controller RXB39.1Communicating room controllerfor fan-coil applications FC-13The RXB39.1 room controller is used for temperature control in individualrooms. For 2-pipe or 4-pipe fan-coil systems, with or without change-over ECM fan support PI control KNX bus communication Integration into the Desigo building automation and control system viaPX KNX DC 0…10 V control of valve actuators, fan, and electric heating coil Volt-free relay contacts for release of the fan and the electric heating coil Commissioning with ETS Professional, "HandyTool" or Synco ACS AC 230 V operating voltage Pluggable screw terminals

Siemens RXB39.1 Manual

KNX and Synco

Definition of terms

Device range

Collective terms for the device types

Product markings on Synco bus devices

The KNX network

Network address

Device address

Area/line couplers and IP router

Engineering notes

Number of bus devices per line, area and network

Bus load number E

Power consumption of bus devices

Central bus power supply

Bus topologies

Distances and cable lengths

Commissioning notes

Commissioning with RMZ operator units

Finish commissioning, plant mode "Auto

Device address and device name

Assign device names

Set device address with RMZ790 and RMZ791 operator units

Device addresses via ACS

Basic communication settings

Set time slave remotely

Remote reset of fault

Communication via zone addresses

Communication of process values

Geographical zone (apartment)

Default value "----" in series B devices

LTE reception and transmission zones

Address zones with RMZ operator units

Large plants

Network topologies

IP router as coupler to IP network

LTE filter table for couplers and IP routers

Predefined LTE filter table

Filtering, zone addresses, communication areas

LTE telegrams via couplers and IP routers

System time, alarms, and remote time adjustment

Engineering large plants

Appendix

Communication error

Heating/cooling changeover

Changeover via digital input

Changeover via analog input

Changeover based on calendar

H/C changeover relay and fault status messages

Room control combination function

Application with zones

Additional zones in the RXB/RXL room controller

Supply chains

Data exchange in LTE-Mode

Update process values

Lightning and overvoltage protection, EMC

Overvoltage protection

Overvoltages in loops

EMC protection management

Index

RXB39.1

Siemens RXB39.1 Manual

Product

Learn More

Legal