Siemens RX1400 Reference Manual

Also see for RUGGEDCOM MX5000RE: Installation guide Installation guide Installation manual Equipment manual

Contents

RUGGEDCOM NETCONFReference GuideChapter 5Changing Configuration DataCopying Data 45]]>]]>The file is saved to the /var/lib/config directory on the device.To overwrite a configuration with a configuration file, do the following:1. Upload an XML configuration file to the device. For instructions on how to upload a configuration file, referto the RUGGEDCOM NETCONF v Web Interface User Guide or RUGGEDCOM NETCONF v CLI User Guide for thedevice.2. Connect to and log in to the device.3. Lock the running configuration: message-id="230">]]>]]>4. Lock the target configuration: message-id="231">]]>]]>5. Discard any configuration changes: message-id="232">

]]>]]>6. Use copy-config to copy the file to a specified configuration: xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">

<{configuration}/>file:///{filename}]]>]]>• {configuration}The target configuration: can be candidate or running.• {filename}The name of the configuration file uploaded to /var/lib/configFor example, this command loads the configuration file standard_config.xml to the runningconfiguration: xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">