Menu
Siemens RV 5200 Installation And Operating Instructions Manual
    | |
RV 5200 Bumperfit Color Rearview CameraInstallation and operating instructions■ Safety precautionsATTENTION:AInstallation may only be carried out by trained specialists! Observe all qualitystandards of the automobile industry!AConsult with your authorized car dealer if installation requires the drilling of holes orother modifications of the vehicle.AFire hazard! When drilling pay attention to the location of cable harnesses, tank andfuel pipes! Never drill into car parts which are load-bearing or are important for safetyreasons!AUse only the parts included with the unit to ensure proper installation. The use ofunauthorized parts can cause malfunctions.ARoute and secure all wiring so it cannot touch any moving parts, such as the gear shift,handbrake and seat rails. Do not route wiring in places that get hot, such as near the heateroutlet.■ Scope of delivery1 Camera with 1.5 m connection cable1 6 m Extension cable (also available as an accessory)1 Mounting bracket (incl. screws and washers)4 Self-tapping screws1 Short instructions (English language)1© 2006 Siemens VDO Trading GmbHAll rights reserved.These operating instructions are subject to copyright.Subject to technical and visual changes and typing errors. |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved