Siemens RDE-MZ6 Operating Instructions Manual

Also see for RDE-MZ6: Operating instructions Manual

1/3 Operating Instructions CB1B1428en_02 / 2018-03-21 Siemens Building TechnologiessOperating Instructions RDE-MZ6The RDE-MZ6 is a multizone controller and is typically used for floor and zone heating applications.It should only be used in conjunction with RDD100.1RF* or RDE100.1RF* room thermostats/transmitters.The multizone controller receives wireless signals from the configured RDD100.1RF orRDE100.1RF and then controls the selected zone(s). Each zone can be controlled individually,either without time program (via RDD100.1RF) or with time program (via RDE100.1RF). Thecontroller can handle up to 6 zones (1 to 6). One thermostat can also be paired to multiple zones.Alternatively, the multizone controller (zone number 6 only output) can be reconfigured for anapplication using a circulating pump or boiler. This means that the remaining zones 1 to 5 are freeto drive the valves and actuators. An internal DIP switch must be operated to activate this feature.The multizone receiver is equipped with a built-in antenna and operates at a frequency of 433 MHz.* To be ordered separately (S55770-T319 = RDD100.1RF, S55770-T320 = RDE100.1RF)1 Indication of data transmission and operating state (LED)2 Initialization of wireless communication with transmitter(LEARN button)3 RESET button

/ 3

Related manuals for Siemens RDE-MZ6