Siemens OptiPoint 410 Operating Instructions Manual

Also see for HiPath 4000: Administrator's manual Administrator's manual Administration manual Administration guide User manual

Contents

Making Calls – Convenience Functions33Step by StepHaving the number of the called station displayedIf the number of the station for which you (as a memberof a call pickup group) wish to pick up a call does not ap-pear on the display, you can enter the code for "Displayon request" after lifting the handset. If you are not sureof this feature access code, ask the service personnel:n Lift the handset.After the code has been entered, the station number ofthe telephone that has been called is displayed.Taking a call in a hunt groupCalls are distributed to any idle member of a hunt group.Your telephone rings.n Lift the handset.Incoming call on loudspeaker (speaker call2-way)A colleague addresses you directly over the speaker.The speakerphone mode is automatically activated.Answering via speakerphone is immediately possible.or n Lift the handset and reply.Enter the code!This function is not available withoptiPoint 410 economy.You can address the colleague directlyÆ page 37.