Siemens Milltronics WD600 Instruction Manual

Also see for Milltronics WD600: Operating instructions

Contents

Page 12 WD600 - INSTRUCTION MANUAL 7ML19985KM01MaintenanceMaintenanceBecause the WD600 has no moving parts, the scale requires no active maintenance.Once the scale is installed into the conveyor, the conveyor becomes part of the totalweighing system. If a problem develops with the conveyor, that problem may also affectthe scale. For this reason, we recommend that a periodic conveyor maintenance programbe established for any conveyor that incorporates a scale.Spare PartsThe only spare part recommended for the WD600 is the load cell. Refer to the load cellnameplate for the proper size and then specify as follows when ordering.Note: Re-install the shipping stops during maintenance or any other time when pro-tection of the cells is necessary.