Siemens MCP 398C Manual

Emergency stop buttonEmergency stop buttonPress the red emergency stop button in the event of emergencies if∎ people are at risk,∎ there is the danger of machines or the workpiece being damaged.As a rule, when operating the emergency stop button, all drives are broughtto a standstill with max. braking torque.To unlock the emergency stop button, turn it to the left.Machine manufacturerFor other reactions to the emergency stop:Refer to the specifications of the machine tool manufacturerWARNINGDanger of death resulting from the premature emergency stop unlockingIf you have shut down the system to be monitored, you can only unlock the emergency stopbutton or put the system to be monitored back into operation if the condition that triggeredthe emergency stop function has been corrected and a safe restart is carried out.Emergency stop circuit(0(5*(1&<6723Figure 3-2 Emergency stop circuitSlots for control devicesNOTICEAvoid damage to the frontNote that the openings for the installation of control devices ⑨ in Fig. "Position of the operatorcontrols on the MCP 398C" must not be broken out, but drilled to the required width.Operator control and display elements3.1 Front sideMachine control panel: MCP 398C26 Manual, 12/2017, A5E43199783B AA