Siemens LOGO! 8 Manual

Also see for LOGO! 8: Manual Manual Manual Manual

4 OperationTime Switch FunctionEntry ID: 109745699, V1.0, 04/2017 30 Siemens AG 2017 All rights reservedWeb serverThe following table shows, how to set a time in the message text via the webserver, using the example of standard time.Table 4-2: Changing the switching times via the web serverNo. Action1. Enter the IP address of the LOGO into your default browser to open the webserver.NoteIt is assumed that your PC or mobile device is connected to the LOGO! basicdevice via a network (LAN or WLAN via router) and is located in the same subnetas the LOGO!.2. Log on with the web server password.The default password is “LOGO”.3. 1. In the web server menu, select the display for the LOGO! TD.2. With the ▲ or ▼ arrow keys, select the message text of the standard time.3. Click the parameter you would like to change.4. 1. Enter a new value for the parameter.2. Confirm with “OK”.