Functions used during calls35Step by stepParking 1The parking feature can place up to 10 internal or exter-nal calls on hold and answer these at any extension.Required: A call must be in progress.(d) With standard MF telephones, first press the Flash key.qij Enter the code for parking.d ... m Select a parking slot(e.g., 0).w Wait for a confirmation tone.t Replace the handset.Recovering a parked calln Lift the handset.rij Enter the code to retrieve a parked call.d ... m Select the parking slot you want to answer (e.g., 0).w Wait for the call to be answered.s Start conversation.Recovering a parked external callAn external call placed on hold using the "General park-ing" feature in a telephone system can be retrieved onany extension that has access to the same external line.Required: An external call must be placed on hold in aknown external line.n Lift the handset.qjg Enter the code to retrieve the call.p Enter the number of the external line where the call isparked (for example: 801).s Start conversation.[1] If the slot selected is busy, a rejection tone is heard.If a call that was placed on parking is not recovered after a specifiedtimeout, it is sent back to the originating extension.
