Functions used during calls49Step by stepTransfer1The Transfer feature allows an extension to transfer acall (incoming or outgoing) to another extension or to anexternal number.Required: A call must be in progress.Select and confirm.j Enter the extension or external number.Optional ([) Let the caller know that there is a second call.Confirm.or\ Replace the handset.orn Press this key. The LED goes off.From external-to-external over an analog trunk2When there is an external call in progress, an extensioncan make a consultation to another external numberand transfer the call, as described above.Once the call is transferred and answered at the desti-nation, a disconnect timer is activated (default is 5 min-utes). A 20-second warning tone is sent to both partiesbefore the call is disconnected. In order to continue thecall without disconnecting, the destination numbermust enter a code (MF, default "00") to restart the time-out., The call disconnect timeout and the code to resetit are configurable. Please ask your system’s supporttechnician for further information.[1] If a transfer’s destination extension does not answer, the call is re-turned to the calling extension.An external-to-external transfer can only be made when at leastone of the calls is an outgoing call.A call cannot be transferred to an entrance telephone, neither canan entrance telephone transfer a call.A call can only be transferred to a busy extension if "Transfer whenExtension is Busy" feature is activated (see programming manual -Programming an extension - Transfer when Extension is Busy). Inaddition, this can only be carried out within the limitations specificfor "Urgent Call/Callback when Busy".TRANSFER?TRANSFER?[2] A call is terminated under three conditions:• Disconnect timeout after and external-to-external transfer(Code 183);• When a busy signal is detected;• Type of answering signal (Code 158) detected.
