Siemens HiPath 1100 Programming Manual

Also see for HiPath 1100: User manual User manual User manual User manual Quick reference guide

Contents

Programming an Extension87Step by StepExternal-to-External TransferThis feature allows a specified extension to transfer anexternal call (incoming or outgoing) to another externalcall.Required: Programming Mode must be active (*9531994).Enter the code for programming.Enter the extension number (e.g. 11/101).or Activate/Deactivate Transfer:= To activate= To deactivate (default)Press this key.Initial state for Programming Mode.0 19* #*##An External-to-External transfer can only be madewhen at least one of the lines is a digital line andone of the calls is outgoing.An External-to-External Transfer over an analogline is terminated in the following three situations:• Elapsed timeout for external-to-external con-nection (Code 218)• When a busy signal is detected• Type of Answering Signal (Code 158).