Step by stepConfiguring the SpeedStream 4100 modem190Configuring the SpeedStream4100 modemOnce you have installed the ADSL access to you provid-er and the connections to HiPath 1100, you may need toadjust the parameters of the SADSLIM (HiPath 1120)and ADSLIM (HiPath 1150/1190) modules of the ADSLmodem.These adjustments can be made by going to their IPnumber(192.168.254.254 - Default) from your Webbrowser http://192.168.254.254 (Microsoft Internet Ex-plorer or Netscape Navigator, version 5.0 or higher)where you must configure the information of the ADSLand VPI/VCI protocols used by the operator, DNS, username and password of the provider.Administration of the TME1 mod-uleAdministration of the module TME1 can be made withE1 CAS access or S2 access. For each access modethere is a tool for configuring the module:• E1 Trunk Manager E1 CAS access• S2M Maintenance for S2 access.Hardware Requirements:– Serial interface communications (COM port).E1 Trunk ManagerYou can use the administration program to:• download software and databases• remove traces• select the software’s type of connection to the mod-ule (local or via modem)• select a COM portFor further details on how to configure a TME1 modulerefer to the program’s “Help” systemThe ADSL modem used is the Siemens Speed-Stream 4100. You can consult the configurationinstructions in the manual which you will find inthe Setup and Installation CD.
