Siemens GIGASET SX762 WLAN DSL Manual

Also see for GIGASET SX762 WLAN DSL: Installation guide

Contents

51Configuring Advanced Settings– In the Subnet mask field enter the given Subnet mask.ì Click Test Settings to check the settings.An attempt is made to set up an Internet connection. The result is shown in a sepa-rate window.ì Click the Close button, which is shown if the test was successful.ì Click OK to apply the settings.Note:If you have selected Non NAT service during the Internet connection configurationno IP address translation takes place as described in section "Setting up the NAT func-tion" on page 57. In this case a PC which you want to provide Internet services (e.g.Web or FTP service) is accessed from the Internet via its own IP address. You may haveto change the network settings of the PC so that the IP address is in line with therouter’s IP address and subnet mask. For detailed information how to do this, refer tothe document entitled "Configuring the local area network" on the CD-ROM. Addition-ally, you should install a firewall software on the PCs, e.g. by using the Windows oper-ating system resources.