Siemens DMS8000 Application & Planning

Also see for NK8000 MP4.40 Series: Installation, Function & Configuration Installation, configuration & operation

Contents

Automation level configurations47Building Technologies 049_DMS_DMS8000_Application_Specification_Planning_MP4.81_A6V10063710_a_en.docCPS Fire Safety 09.20163.2.11 NK82xx serial configurationFig. 31 NK8000 serial configuration for MM8000/MK8000 exampleNote: Not all subsystems are configurable for MK8000. Refer to section 3.1.System architectureThis configuration allows for integration of a number of Cerloop (proprietary Class Aloop), Cerban and/or RS485 connectable control panels. In addition it allows for CS6Guarto integration via LON-bus. One of the NK82xx Serial Ports provides the liaisonfor a local management station (MM8000/MK8000).Communication/connectionThe NK82xx is connected on upstream side via RS-232 (proprietary CMSDL protocol)to the management system.Note: A (temporary) Ethernet network link is required for configuration download.On the downstream side, the NK82xx is connected via serial lines and/or via LON-busto a number of different fire & security control units.® For supported downstream configurations/protocols of NK82xx, please refer to theNK82xx-Ethernet Port Datasheets.To learn how to obtain these documents, see the Documentation resource informa-tion section on page 5.