Siemens DIF4305 Installation And Operating Instructions Manual

Contents

Summary of instructions for dishwasherBrief and handy:everything your dishwasherneeds.Before using for the firsttime, read the installationand operating instructions!Select programme Off we goSwitch off the appliance Everything o.k.Fill with rinse aidFill with detergentFill with saltTurn on the tap Water readyWhen the “programme end” display illumi-nates, switch off the main switch. Turn offthe tap.Switch on the applianceClose the door. Press the On/Off switch,the last selected programme starts automatically.5600 053 022 en Setting the water softening system * Quickly sortedFind out the waterhardness at your waterutility company andenter below* only before using thedishwasher for the firsttime or if the water hard-ness changesRead off the settingSettingdH fH Clarke mmol/land then select a setting– Hold down programme button B and switch on the mainswitch, then release the buttons. The . display flashes andbuttons A and B illuminate (water hardness setting was setto 2 at the factory).– Each time button B is depressed, the setting increases byone (0-3). If buttons A, B and C illuminate, the maximumwater hardness setting has been reached. If the waterhardness setting is now increased again, the lights go outand the water hardness setting is set to 0.– Switch off the main switch. The selected setting has beenstored in the appliance.0123ResetA B C22–350–67–1617–210–1,11,2–2,93,0–3,73,8–6,29–200–1112–2930–3738–600–821–2627–44Dissolves limescale (not required for set value 0!)Unscrewthe lid.Only before usingthe dishwasherfor the first timepour approx. 1 l /2 pt water into thesalt opening.Pour in max.1.5 kg / 3 lb 5 ozsalt (never deter-gent!)Screw on thelid. Switch ondishwasherimmediately.Everything is sparkling clean ... Refill whenever level indicator is light!Press mark 1,lift up lid 2.Pour inrinse aid.Close thelid. CLICK!Very dirty dishes, a lot of detergent ...If required, openthe lid (press thepin).Warning,combinationproducts are notsuitable for allprogrammes,follow manufac-turer’s instructions.Pour indetergent.Push the lidshut, press.PLOP!Quick, economical or intensive ...This overview indicates the max. possible number ofprogrammes. The programmes which correspond to yourappliance can be found on your appliance fascia.The programme data are values measured in thelaboratory in compliance with Standard EN 50242.Deviations is practice are possible.Overview of programmes1031,40201550,8013710,7014300,5010200,104355070 65 40Duration in minutesPower consumption in kWhWater consumption in litresIntensive Normal Eco Gentle Quick Prerinse1401,3518Programme progress / Rinsing noisesAfter the drying cycle, water is pumped out for approx. 60 sec. The programme has not ended until the end display lights upStart End displayAlternating rinsing and pumping noises No rinsing noises15–35 minCleaning / Final rinse DryExample: Eco programme

/ 2

Related manuals for Siemens DIF4305