Menu
Siemens CLVD1325/5-50 Installation Instructions Manual
  |
CLVD1325/5-50Order number 2GF1667-8AUDocument A6V10062007Edition 02.2007Installation Instructions EnglishINTRODUCTIONThank you for purchasing this Siemens product. Please read and followthese instructions carefully.MOUNT TYPEThis lens is designed for use with 1/2 inch C-mount CCD cameras(17.526mm flange dimension). When fitting the lens to a CS-mountcamera, an adapter ring must be used to ensure correct flange position(supplied free of charge with all Siemens cameras).MOUNTING TO THE CAMERAThe lens is installed by screwing it clockwise into the mount on the CCTVcamera. Having screwed the lens in as far as it will go, you can rotate thelens chassis back to suit the setup position of the camera.IRISIf the camera is fitted with a selection switch for Video and DC, set it toDC.TO INSURE LONG-TERM RELIABILITYRemove dust from the lens using a blower or soft brush. Avoid touching thelens surface.Use lens cleaning paper or a clean cotton cloth with a little cleaning liquid toremove finger prints or oil stains from the lens surface. Start in the centre ofthe lens and work outwards. Avoid using organic solvents such as thinner orbenzene.SPECIFICATIONImager Size 1/3 inchFocal Length 5-50 mmAperture Range DC IRIS F 1.4 – 360TELE WIDEAngle of View HorizontalVertical 5,6°4,2°53,6°40,3°Mount-Type CS-MountApplication Temperature Range -10 - +60°CMinimum Object Distance 0,3 mPRODUCT SAFTY PRECAUTIONSThe following symbols appear in these safety instructions. This symbol indicates presents of an electrical current and therisk of electric shocks. This symbol means that you should not disassemble theproduct. This symbol indicates a risk of fire. This symbol means that you must comply with the instructionconcerned.HAZARDSerious injury or loss of life may result from failure to comply with safety instructions in this category. Do not scratch, cut open, twist or heatthe connection cable. Do not disassemble the unit or try toinsert metal objects or flammable materials into it. Do not attempt to use the product if yousee smoke or smell burning. If the connection cable is cracked ordamaged, switch off immediately. Do not expose the unit to water. Ifwater should penetrate the unit, switch offimmediately. Do not look into the sun through thelens as this could cause blindness. Do not place the unit near extreme heat,an open flame or a source of flammable gases. Do not try to repair the unit or thepower supply Keep the product out of children'sreach. If the product were to fall on a child, itcould cause serious injury. Do not plug in or unplug the cable withwet hands Do not expose the product to extremelyhigh or low temperatures. (not hotter than +60°Cor colder than -10°C). Extreme temperatures willaffect performance and may damage the product. Keep the connection cable away fromheat sources as these could melt the insulation. Do not place the product near a stoveor humidifier or in any other location where thereare conditions of high heat or humidity. If you intend to connect the product toanother product, read the connection instructionsin both product manuals carefully beforehand. Do not store a lens in direct sunlight.Light passing through the lens could cause a fireif directed at a flammable material. Do not drop the product or expose it toheavy impacts. This could lead to seriousdamage.Front ViewD1 32 mmD2 24,6 mmPin out connections(Camera socket viewed fromabove)Pin Function1 Control - Orange2 Control + Yellow3 Driver + Red4 Driver - BlackSide ViewD1 40 mmD2 38,6 mmL 59,2 mmA 4,0 mm |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved