Siemens CLSC3000 Installation Manual

CLSC3000 FCC ComplianceInstallation Manual, CLSC004enI3c© Siemens AG 2010 / Date of issue: 2010-05-19 12-112 FCC ComplianceNote!This equipment has been tested and found to comply with the limitsfor a Class A digital device, pursuant to Part 15 of the FCC Rules andmeets all requirements of the Canadian Interference-CausingEquipment Standard ICES-003 for digital apparatus.These limits are designed to provide reasonable protection against harmfulinterference when the equipment is operated in a commercial environment.This equipment generates, uses, and can radiate radio frequency energy and,if not installed and used in accordance with the instruction manual, maycause harmful interference to radio communications. Operation of thisequipment in a residential area is likely to cause harmful interference, inwhich case the user will be required to correct the interference at his ownexpense. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one ormore of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected. Consult the dealer or an experienced radio/T.V. technician for help.Siemens AG is not responsible for any radio television interference causedby unauthorized modifications of this equipment or the substitution orattachment of connecting cables and equipment other than those specified bySiemens AG. The correction of interference caused by such unauthorizedmodification, substitution or attachment will be the responsibility of the user.The use of shielded I/O cables is required when connecting this equipment toany and all optional peripheral or host devices. Failure to do so may violateFCC and ICES rules.