Menu
Siemens ACUSON Antares Instructions For Use Manual
                                                                                                                                                                                                                                      |
2 S a f e t y a n d C a r e2 - 1 8 [ 1 ] I N S T R U C T I O N S F O R U S EPossible Combinations with Other EquipmentWARNING: Accessory equipment connected to the analog and digitalinterfaces must be certified according to the respective EN and IEC standards(for example, EN 60950 and IEC 60950 for data processing equipment andEN 60601-1 and IEC 60601-1 for medical equipment). Furthermore, allconfigurations shall comply with the system standards EN 60601-1-1 andIEC 60601-1-1. Anyone who connects additional equipment to any signal input orsignal output ports configures a medical system and is therefore responsiblethat the system complies with the requirements of the system standardsEN 60601-1-1 and IEC 60601-1-1. Siemens can only guarantee the performanceand safety of the devices listed in the System Reference. If in doubt, consultSiemens service department or your local Siemens representative.The ultrasound system supports a maximum of three documentationdevices connected to the system. Depending on how your system isconfigured, certain documentation devices will maintain power when thesystem is powered off. Although this will not cause harm to yourdocumentation device, Siemens recommends that you power off eachdevice whenever the system is powered off.Some on-board peripheral devices must be installed by an authorizedSiemens representative or by a Siemens-approved third party. Devicesinstalled by other people will be at the user's risk and may void the systemwarranty.[1] Instructions for UseDocumentationDevices Ch 1System Setup Ch 4SystemRequirements Ch 6System ReferenceAccessories Ch 2 |
Related manuals for Siemens ACUSON Antares
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved