7SR21 & 7SR22 Data CommunicationsThe copyright and other intellectual property rights in this document, and in any model or article produced from it(and including any registered or unregistered design rights) are the property of Siemens Protection DevicesLimited. No part of this document shall be reproduced or modified or stored in another form, in any data retrievalsystem, without the permission of Siemens Protection Devices Limited, nor shall any model or article bereproduced from this document unless Siemens Protection Devices Limited consent.While the information and guidance given in this document is believed to be correct, no liability shall be acceptedfor any loss or damage caused by any error or omission, whether such error or omission is the result ofnegligence or any other cause. Any and all such liability is disclaimed.©2010 Siemens Protection Devices Limited7SR21 Non-Directional7SR22 DirectionalOvercurrent RelayDocument Release HistoryThis document is issue 2010/05. The list of revisions up to and including this issue is:2010/05 Additional Comms modules option of (RS485 + IRIG-B) and (RS232 + IRIG-B) and typographicalrevisions2010/02 Document reformat due to rebrand2009/09 Third Issue. Software revision 2435H80004/5 R4b-42008/07 Second issue. Software revision 2435H80004/5 R3d-3.2008/03 First issueSoftware Revision History2009/09 2435H80004/5 R4b-4 CTS-I Supervision. Undercurrent 37G & 37SEF. Vx U/O Voltage.46BC U/C. Comms Settings. Waveform Storage Settings. FaultStorage Settings. Energy Storage. Trip test function. Local/Remotemodes. Settings ranges extended. Protocol changes.2008/07 2435H80004/5R3d-3 Demand records. Optional DNP3.0 data comms.2008/03 2435H80004/5R2c-2b First Release