Siemens 2000 Administration Manual

Also see for HiPath 3000 V3.0 or later Gigaset M1 Professional: Operating instructions Operating manual Operating instructions Operating instructions Operating instructions

Contents

optiPoint application module Administration41Step by StepConfiguring the LDAP ServerPerform the following steps to enter the LDAP server IPaddress and port number:1. Start the Web-Based Management Tool, seeÆ page 43.2. Select "Administration" > [password] > "Applica-tions" > "LDAP", see Æ page 47.3. Enter the IP address of the LDAP server, seeÆ page 69.4. Select "Submit".5. Select "System" > "Port Settings", see Æ page 56.6. Enter the port number for communication with theLDAP server, see Æ page 69.7. Select "Submit".Installing an LDAP TemplatePerform the following steps to transfer a template toyour optiPoint application module:1. Maker sure that an FTP server is available (seeÆ page 89) and that the relevant template file isstored on the server.2. Start the Web-Based Management Tool, seeÆ page 43.3. Select "Administration" > [password] > "File Trans-fer", see Æ page 50.4. Enter the following parameters:– FTP server address, see Æ page 64– FTP account name, see Æ page 64– FTP username, see Æ page 65– LDAP template filename, see Æ page 725. Select "Download LDAP template" from the "Actionon submit" list, see Æ page 58.6. Select "Submit".A standard template is already installed. You canalso install a template that corresponds to yourpersonal criteria. See Æ page 70 for an exampleof this.