Siemens 1FK7 Series Operating Instructions Manual

Also see for 1FK7 Series: Configuration manual Instructions

Synchronous Motors 1FK7Operating Instructions, 03/2011, 610.40700.40c 37Commissioning 77.1 Measures prior to commissioningBefore commissioning the system, check that it is properly installed and connected. Thedrive system must be commissioned as described in the operating instructions for theconverter/inverter.DANGERRisk of electric shockWhen commissioning/operating electric motors, parts of the motor are always at adangerous voltage. If this motor is not correctly handled/operated, this can result in death orsevere personal injury as well as significant material damage. All of the warning informationon the product must be carefully observed!WARNINGDanger from rotating rotor.Provide the appropriate guards and covers for transmission elements.NoteThis list below does not claim to be complete. It may be necessary to perform additionalchecks and tests in accordance with the specific situation at the plant or system.Mechanical connectionMake sure that:● Touch protection measures are in place for moving and live parts.● The fitted keys in the shaft extension (if available) must be firmly secured to prevent themfrom being flung out.● The motor has been correctly installed and aligned.● The rotor can turn without coming into contact with other parts and components.● The operating conditions correspond to the data specified on the rating plate.EUROSERVO SERVO MOTOR TAMİR MERKEZİWWW.EUROSERVO.COM.TR